1- GENERAL SYSTEM DESCRIPTION:
PRODUCTION TECHNOLOGY : DIN EN 10326 standard thin section
galvanized C and U profiles, produced by S320GD+Z,+AZ quality
no:1332, S350GD+Z,+AZ quality no:1335, and/or quality no: 1322
produced in Cad-Cam controlled fully automatic continued roll -forming
does not involve welding.
ASSEMBLY: Wall Panels, Roof Beam,
Beams and Mezzanine are assembled with Special Screws and Bolts
without Welding. This allows
for multiple Dis-assembly - Assembly.
STATIC CALCULATIONS: Calculations
regarding compliance of the building to its purpose, and seismic
and static calculations depending on the region, are made by
Sap2000, CFS, STA4CAD, BRICSCAD, HAYESCAD programs in accordance
with the load values defined in project and standards, as well as
European Standards and/or International Standards as defined in
HEAT (CLIMATE) CALCULATION: Outer Wall and Roof are
detailed in consideration with European climatic conditions of the
region and to comply with recommended Insulation Values. There is
insulation material between C profiles of the panels. Therefore
Heat Balance is not required.
Inner and Outer Wall Panels are produced
with conduit in the
for wiring during
FINISHINGS: For Panel connections; PVC
T profiles are used in Inner Surfaces, 30 mm thick
plate (Betopan) laths are used in
surfaces. Outer surface
coating is CE approved (Fire and Water Resistant) Decorative
Shield and Sutured Cement board.
2- PREFABRICATED HOUSE SYSTEM, COMPLIANCE STANDARDS:
Buildings – Light – Generated by Cold Shaped Profiles– Calculation
648 : Calculations and Construction Rules for Steel
Usage and Settlement Loads in Houses and Utilities
Calculation Values for Dimensioning of Construction Elements
7046 : Principles for Construction Design
ENV 1993–1–2 :(Euro
code 3) Design of Steel Buildings Volume 1–2: General Rules-
Constructional Design Against Fire
4561 : Calculation Rules of
Steel Buildings According to Plastic Theory
ENV 1090-1 : Steel
Construction Applications –Volume 1:General rules and rules for
ENV 1090-3 : Steel Construction Applications – Volume
3: Additional rules for steel resistant to High Currency.
ENV1998-1: Euro code 8: Projecting Buildings Resistant to
Earthquake –Volume 1: General rules , rules for seismic effects
EN 10326 : Delivery Terms for plates produced by
continuous hot galvanized Construction Steel
EN 10327 : Delivery Terms for plates produced by continuous hot
galvanized, cold shaping purpose, low Carbon Steel
EN 10162 :
Steel Profiles – Cold rolled – Technical delivery conditions –
Size and section tolerances,
EN 20898 : Mechanical
specifications of connection elements
EN 20898-2 : Mechanical
specifications of connection elements – Volume 2: Experiment Load
Values Determined Nuts—Normal Step
3- DECORATIVE – SHIELDED OUTER
Recommended Insulation Values Acc.
to TS825 MAINTAINED HEAT INSULATION VALUES
1st Climate Region :
0.80 W/m2K 0.442 W/m2K (Compliant)
2nd Climate Region : 0.60
W/m2K 0.442 W/m2K (Compliant)
3rd Climate Region : 0.50 W/m2K
0.442 W/m2K (Compliant)
4th Climate Region : 0.40 W/m2K 0.398
Outer wall Thickness :100 mm (110 mm for 4th
Outer Surface Coating :12 mm thick, decorative,
cemented board (Shielded and decorative sutured) (CE approved)
Heat and Noise Insulation Material: 75 mm thick Polystyrene Foam
retardant: “B1” class “flame resistant” material in accordance
with DIN 4102.
Carrier Panel construction: Specially shaped
Galvanized C Profile.
Cold Bridge prevention: 10 mm water-resistant
wooden lath. (20 mm for cold climate region)
System: Galvanized C profile produced one-piece in Cad-Cam
controlled continued roll-form machines. (70 mm) (Static
calculation: 1 – 4 mm thick)
Outer Wall Inner Coating: 8 mm
thick cemented board
Outer Wall Inner Coating Paint:
Plasticised Paint (Double Coating)
Outer Wall Outer Coating
Paint : Acrylic Paint (Double Coating)
Accessories : 30 mm thick cemented board.
30 mm thick cemented board.
4- INTERNAL WALL DETAILS
Internal Wall Thickness: 60 mm
Inner Surface Coating: 8 mm
thick cemented board. (CE approved)
Heat and Noise Insulation
Material: 44 mm thick Polystyrene Foam (16kg/m3)
retardant: “B1” class “flame resistant” material in accordance
with DIN 4102.)
Carrier Panel Construction: Galvanized C
profile produced one-piece in Cad-Cam controlled continued
roll-form machines (44 mm) (Static calculation: 1 – 4 mm thick)
Panel Connection System : Connected by special design and detail
Galvanized connection elements, bolt and screw without welding.
Decorative PVC T profiles in joints of the panels.
Inner Coating : 8 mm thick cement shiver plate (CE approved)
Inner Wall Inner Coating Paint : Plastic Paint (Double Coating)
Wet Volume Inner Coating :12,5 mm thick Water resistant Plaster
5- CEILING ROOF DETAIL (Suture Banded, hidden joints)
Ceiling Roof Coating :12,5 mm thick FX Plaster Plate (WR Water
resistant plaster plates in wet areas) Suture band applied in
Insulation Material: 80 mm thick Rolled Fibre (Water
resistant due to lack of Hydroscopic and capillary property.)
6- ROOF DETAIL
Recommended European Insulation
1st Climate Region :0.50 W/m2K 0.440 W/m2K (Compliant)
2nd Climate Region :0.40 W/m2K 0.361 W/m2K (Compliant)
Climate Region :0.30 W/m2K 0.234 W/m2K (Compliant)
Region :0.25 W/m2K 0.234 W/m2K (Compliant)
Alternative–1 : Metal Based Tile Form (Metal Tile)
Roof Coating Alternative –2 : Shingle
Truss : Specially Shaped
Vapour Balance : HDPE touch fibre cover
Constructive Coating : 11 mm OSB-3 (Compressed fibre wooden plate)
Roof Support System : Made of specially designed galvanized sheet.
Connected by bolt and screws without welding.
Material: 80 mm thick Fibre (14 kg/m3) (For 1st Climate Region)
Insulation Material :100 mm thick Fibre (14 kg/m3) (For 2nd
Insulation Material :160 mm thick Fibre (14
kg/m3) (For 3rd – 4th Climate Region)
Ceiling Roof construction
: Specially designed Omega Profiles.
Rain Channel and gully :
Square section coat coil painted galvanized stream and drops.
Fringe Coating : 40 cm wide 12 mm thick cement shiver plate
Size :890 x 1960
Door : Steel door without furnishing
Door Casing :
Cylindrical lock / Metal door knob
Door :American panel ( 40mm ) White
:Metal Door Casing (Wooden Door Casing Optional)
Lock / Knob :
Embedded Lock / Metal door knob
Door is detailed with 4 cm
Window :90x130 cm PVC material
Housing : SPECIAL PRODUCTION
Horizontal window : 60 / 40 cm PVC material
Window :4+9+4mm heat control coated double glazed unit
window :4mm thick frosted glass
Formed by combination of steel profile cage panels with special
details. Parts like outer walls, inner walls, and beams are made
of galvanized steel profiles, and production and assembly do not
Upper Coating :16 mm Betopan (cement shiver
plate) (CE Approved)
Ceiling Roof Profile :15 Db Noise
Absorbing Protector Ceiling Roof Profile and Clips (European
Ceiling Roof :12,5mm thick White ALCIPAN
Insulation :80 mm thick Mattress Fibre ( 14 kg/m3 )
Taking usage purpose of the building into consideration, mobile
load value is
assumed in accordance with 200–350-500 kg/m2
Carcass: Carcass made of galvanized steel profiles.
Coating: Coloured Polished Beech Coating
Note: Wooden ladder and railing are optional.
Outer Surface: 2 coats Acrylic outer surface paint
2 coats Plastic paint (colours shall be determined by the
Ceiling: 2 coats Plastic paint (colours shall be
determined by the contractor.)
Note: Textile based Decorative
Wallpaper is used instead of Inner Surface Paint upon request.
contact us for Color Charts which can be used on all
Cable 250 V
NYM and NYA 3x2,5 mm2
Lighting Cables NYM and NYA 2x1,5 mm2
Lighting Armatures Normal spaces 2x40 FLUORESCENT (LED fittings
Damp spaces Round Globe– Diamond-Shaped
Door Top Outer Globe – Diamond-Shaped
Fuse, fuse boxes –
Electrical Board Contractor’s responsibility.
Telephone Installation Contractor’s responsibility.
Connection Contractor’s responsibility.
Fuse board :
available in all buildings.
NOTE: Stove, Air Conditioner,
Electrical Radiator usage should be specified in the project.
Each heater, air conditioner shall be fed by a separate fuse
water PPRC pipe
Pipes (drain) PVC pipe
Sinks 40x50cm freestanding
Sink Tap Taps Sink
Sinks Ceramic reservoir
Shower tray 80x80
Shower/bath mixer taps
Cut off taps mounted on the wall.
Kitchen Installation Hot/Cold water inlets. No cabinets in the
Main line connection Contractor shall be
responsible for drain and potable water main lines and
15-PACKAGING FOR TRANSPORT
provided depending on the transportation type (Land, Sea, Air).
contact us for
insulation alternatives, special needs, and additional information.